The Max Tower is the latest design offered by Make A Wake marine. Featuring the modern forward facing tower design, it looks at home on any style of boat large or small. The top bar is rock sold from side to side there are no welds or joins. The curve end slip into the top tubes of the side bars which can rotate outwards to the required stance for the width of your boat.
Using our smooth rotating deck mounts AU innovative patent, you can easily mount on the top or angled sides of your boats deck. Drilling only 1 hole at each mount, the bolts or hidden inside the mounts. Making the mounting system clean and smooth looking like a factory fit. When you go to lower the tower, the tower will pivot forwards and the front deck mounts will rotating under slight pressure whilst you lower it. No other tower on the market is like this.
We take the extra time and effort to make sure the best quality material used in the production of the tower, using 6063 seamless, thick 3mm walled tubing, 6061 solid fittings and 316 stainless steel bolts and washers. They are then handcrafted and bent to perfection and hand welded after which the highly skilled polishers, polish the tubes and fittings to the highest finish.
We then go one step further than other brands, the highly polished towers are then dipped and clear anodized coating of the towers and fittings for that superior finish to protect you investment for many years to come. This has the added bonus of a easy to clean tower with no polishing need and no grubby finger marks. For the black tower were spend the extra time and money to have the towers treated and PPG powered coated just like motor vehicles, to take the harsh environments. So you can be assured your investment is not some cheap, poor quality product that will be destroyed in the marine environment. The finer details are the difference.
FEATURES
Using our smooth rotating deck mounts AU innovative patent, you can easily mount on the top or angled sides of your boats deck. Drilling only 1 hole at each mount, the bolts or hidden inside the mounts. Making the mounting system clean and smooth looking like a factory fit. When you go to lower the tower, the tower will pivot forwards and the front deck mounts will rotating under slight pressure whilst you lower it. No other tower on the market is like this.
We take the extra time and effort to make sure the best quality material used in the production of the tower, using 6063 seamless, thick 3mm walled tubing, 6061 solid fittings and 316 stainless steel bolts and washers. They are then handcrafted and bent to perfection and hand welded after which the highly skilled polishers, polish the tubes and fittings to the highest finish.
We then go one step further than other brands, the highly polished towers are then dipped and clear anodized coating of the towers and fittings for that superior finish to protect you investment for many years to come. This has the added bonus of a easy to clean tower with no polishing need and no grubby finger marks. For the black tower were spend the extra time and money to have the towers treated and PPG powered coated just like motor vehicles, to take the harsh environments. So you can be assured your investment is not some cheap, poor quality product that will be destroyed in the marine environment. The finer details are the difference.
FEATURES
- Easy to install
- No complicated fitting or alignment.
- DIY 2 – 4 hours to fit.
- 1 person to lower for storage.
- Fits boat 17 – 25ft long.
- 82 inches to 102 inches wide mounting.
- 55 inches tow point from mounting position.
- 2.25 inch 6063 Aircraft seamless Aluminium.
- CNC 6061 Aircraft Aluminiun fittings.
- 316 Marine grade Stainless M12 bolts and washers.
- Anodized coating or Glossy powder coated Black.
- Best deck mounts on the market.
- Solid one piece top bar section.
- Our Pro Bimini will fit this tower.
| liquid-max-install-guide.pdf |